Malaga v8 chassis strengening

Show us yours! Or someone elses!

Malaga v8 chassis strengening

Postby LB_malaga » Tue Jul 28, 2009 9:31 pm

So this is the all-important chassis strengthening to take the V8 power and torque. What I’ve uploaded here is my first rough sketch of my proposals, hopefully it’ll make a bit of sense and I’ll draw it up in CAD when I get a minute so if you like it copy it!

http://i959.photobucket.com/albums/ae74 ... sketch.jpg

Parts A, B, C, F, G, I, N & O will be in 40x40x3.0mm box section and the remainder will be 25x25x2.5mm. All the dims are slighty over, i'll cut most bits anyway to ensure a good fit (the CAD plan will be better!)

Before I start can anyone please reply if they can see a blatant stupid error!!!!
LB_malaga
Advanced Member
 
Posts: 48
Joined: Tue Jul 07, 2009 6:49 pm

Re: Malaga v8 chassis strengening

Postby LB_malaga » Wed Jul 29, 2009 9:33 pm

well this is my first CAD based plan, still quite rough though to be honest!

ok so the side view isn't that clear, but the plan is that where all the new box meets at the top will join the proposed bulkhead

http://i959.photobucket.com/albums/ae74 ... ismods.jpg
LB_malaga
Advanced Member
 
Posts: 48
Joined: Tue Jul 07, 2009 6:49 pm


Return to Picture Gallery

Who is online

Users browsing this forum: No registered users and 2 guests

cron