Bike carbs

Bike carbs

Postby revb » Tue Aug 30, 2011 10:35 am

I am having a great deal of trouble sorting out gsxr bike carbs on a flange for my 1600 crossflow Melos. The problem is that the that the carbs ,(even on a very short flange collide with the clutch cable, and only just miss the brake master cylinder, not to mention the dipstick!!! Has anyone done this mod on a Melos? I am thinking that a 45 degree forward 15 degree up inlet tube construction may work, but its a bit crowded in the bay with the rad expansion and oil catch tanks in there as well.
I could get rid of the master cyl and clutch cable by fitting a floor mounted pedal box, but as I am 6'3" I am not sure the pedals will be too close.

I was hoping to get the carbs sorted out before I put mappable ignition in (Megajolt).

Thanks,

Brian.
revb
Newbie
 
Posts: 4
Joined: Thu Aug 12, 2010 10:01 am
Location: Pembrokeshire

Re: Bike carbs

Postby marcjagman » Sat Sep 03, 2011 1:05 pm

Could be worth looking at locostbuilders.co.uk as many on there fit bike carbs, not the same car but the idea is the same.
marcjagman
Member
 
Posts: 19
Joined: Thu May 26, 2011 2:21 pm


Return to Melos

Who is online

Users browsing this forum: No registered users and 1 guest

cron